The MICH2000 Ballistic Helmet, part of the SPEAR series in the United States Army, boasts a bulletproof rating of IIIA.
Our MICH2000 Ballistic Helmet NIJ IIIA is constructed of ultra-high molecular weight polyethylene material (UHMWPE), which boasts low elongation at break and strong energy absorption capabilities for superior impact resistance and cutting resistance.
The modern MICH2000 helmet resembles its predecessors in appearance but lacks an edge of the hat, providing more freedom of equipment installation for different scenarios in battle. One major advantage is that its sides can hold headsets specifically designed to secure them with pins; on its front is also equipped with a night vision device, featuring a slot that can fit binocular or monocular night vision goggles (later models also feature rail attachment). Ideal for special operations.
Product Parameter
|
Product name |
MICH2000 Ballistic Helmet NIJ IIIA |
|
Size |
M/L/XL (customizable) |
|
Head Circumference |
540-600mm |
|
Color |
black, green, sandcolor, camouflage, can be customized |
|
Bulletproof material |
Kevlar / PE |
|
Weight |
1.50±0.05KGS/1.55±0.05KGS |
|
Bulletproof area |
0.13㎡ |
|
Bulletproof level |
IIIA.44 |
|
Implementation standards |
NIJ0106.01 |
|
Accessories |
Anti-seismic system,head circumference adjustment system,buffer system, etc. |
|
Warranty |
8years |
|
Feature |
Four-point tactical suspension for increased stability Corrosion resistance, no reflection, easy to conceal camouflage Helmet built-in seismic buffer system, head circumference adjustment system |
Inspection Of Your Kevlar Helmet
Tactical Helmet Shell
- Inspect the exterior of the shell for any dents. If dents are found, check the interior of the shell for any corresponding dents. If corresponding dents are found the tactical helmet shell should be replaced.
- Inspect the exterior of the Kevlar shell for any major scratch or gouges. If scratches or gouges are deep enough and expose & fray helmet fibers, the helmet shell needs to be replaced.
- Inspect the through bolts and holes to ensure they are not stripped or egged out.
- Inspect interior hook and pile (Velcro) used for pad attachment. Any peeling tape or round patches should be replaced with new ones.
- Inspect edging gasket for tears or compromises, if major the helmet shell should be replaced.
- Check manufacturers sticker and warranty date.
Retention And Suspension System (Pads)
- Inspect all bolts to ensure they are snug and the threads are not stripped. Check for rust on all metal hardware.
- Inspect each slide buckle and closure snap for function and cleanliness.
- Inspect pads for tears or rips and replace as needed. Ensure cleanliness of all pads.
Rails and Tactical Helmet Shrouds
- Inspect all permanent helmet accessories for a tight and secure fit to the tactical helmet.
- Ensure helmet shroud tightly locks into place with your chosen mount.
- Inspect and ensure any helmet rail accessories function and are secure
Hot Tags: mich2000 ballistic helmet nij iiia, China mich2000 ballistic helmet nij iiia manufacturers, suppliers, factory, Bulletproof Visor, FAST High Cut Helmet, MICH2000 Tactical Ballistic Helmet, Advanced Combat Ballistic Helmet, Wendy Ballistic Helmet, Bulletproof Helmet
